YLBZ系列液壓輪邊制動器 YLBZ SERIES HYDRAULIC WHEEL BRAKES

應用Application

·YLBZ系列液壓輪邊制動器，主要作為港口、碼頭、等露天使用的大型起重機及港口裝卸機械工作狀態下的防風制動和非工作狀態下的輔助防風制動。

APPLICATION

·YLBZ series hydraulic wheel brake is mainly used for wind proof braking under working conditions and auxiliary windproof braking under non working conditions of large cranes and port handling machinery used in open air such as ports, wharfs and so on.

主要特點 Main Feature

·碟簧液壓缸性能優良，嚴格按照GB/T15622-2005設計、生產、制造。

·常閉式設計，液壓站驅動施力于碟形彈簧而釋放，安全可靠。

·制動塊動作采用連桿結構，確保制動器松閘時摩擦片平面各處與輪端面間隙均等。消除以往松閘狀態摩擦片附貼制動輪的現象。

·防腐型設計，全部緊固件和銷軸為不銹鋼制造，防腐性好。

MAIN FEATURE

.Disc spring hydraulic cylinder has excellent performance and is designed, produced and manufactured instrict accordance with GB/T15622-2005.

·Normally closed design，the hydraulic station drives the disc spring to release,which is safe and reliable.

·The action of the brake pad adopts the connecting rod structure to ensure that the clearance between the friction plate plane and the wheel end face is equal when the brake is released.Eliminate the phenomenon that the friction plate is attached to the brake wheel in the previous brake release state.

·Anti-corrosion design.All fasteners and spindles are made of stainless steel, with good anti-corrosion performance.

使用條件 Operating Condition 

.環境溫度:-20℃~+50℃

.工作壓力:8Mpa

.電源電壓:3相、交流380V、50Hz

.戶外雨雪侵蝕或有腐蝕性氣體和介質應采用防腐型產品。

.有特殊要求時，在訂貨時協商確定。

OPERATING CONDITION

.Ambient temperature: -20℃~+50℃

.Working pressure: 8Mpa

.Voltages: AC 3 phase 380V 50Hz

.Outdoor rain and snow erosion or corrosive gases and media shall be anti-corrosion products.

.Special requirements can be discussed before production.

·例:如額定夾緊力為50KN，輪寬160，左式裝配，其訂貨標記為YLBZ25-160-左；右式裝配為YLBZ25-160-右。

.For example: if the rated clamping force is 50KN and the wheel width is 160,the order mark is YLBZ25-160-left；The right type assembly is YLBZ25-160-right.

YLBZ系列液壓輪邊制動器技術參數及安裝尺寸 TECHNICAL DATA AND DIMENSIONS OF YLBZ SERIES HYDRAJLIC WHEEL BRAKES

·注:當輪寬尺寸B不在表中范圍值內時，可與我們技術部門取得聯系。

Note: Please contact our technical department，when wheel width Bisn't within the range specified in above table.

·具體型號，結構及外形尺寸保留更改的權利。

The size of the specific type and structure should be retained.